Your coffee can taste sour or bitter because of the beans, their roast level or how you brew them. Sharp sourness with little body often points to too little extraction, while harsh bitterness can come from excessive extraction, a dark roast or dirty equipment. Some acidity and bitterness are normal.
Is your coffee sour or pleasantly acidic?
You might recognise coffee's acidity as citrus, apple or berry flavours. In a balanced cup, you'll taste these alongside sweetness and enough body, meaning the weight or fullness you feel in your mouth.
Unpleasant sourness tastes sharper and less balanced. Your coffee may taste lemony without any sweetness, leave a short, unsatisfying finish or feel unusually thin. However, you can't identify a brewing fault from taste alone: a lightly roasted coffee can retain pronounced acidity even when you brew it well.
You can also expect some bitterness in coffee, particularly in darker roasts. A gentle cocoa-like bitterness differs from an aggressive, lingering burnt taste. A dry, rough feeling on your tongue or gums is astringency, not simply bitterness, although you'll often notice the two together.
Taste a little coffee black before adding milk or sugar, then try it again as it cools. You may find individual flavours harder to distinguish in very hot coffee and notice more acidity as it cools.
Why does coffee taste sour?
The most common brewing cause is under-extraction: your water has dissolved too little of the soluble material in the grounds. Acids dissolve readily, but an under-extracted brew may lack the sweetness and other flavours needed to balance them.
You can under-extract coffee by using coarse grounds, cool water, a short brew time or too much coffee for the amount of water. Check your measurements before changing several settings, especially if you measure coffee by spoonfuls rather than weighing it.
- Grind slightly finer to expose more surface area to the water.
- Use hotter water if you're brewing at a relatively low temperature, particularly with light roasts.
- Allow more contact time if your brewing method permits it.
- Use slightly more water for the same coffee dose if your recipe is unusually concentrated.
- Wet all the grounds evenly so you don't leave any dry pockets.
Make one change at a time and taste the result. If a finer grind produces more sweetness without harshness, continue in small steps. If the coffee remains strongly acidic despite sensible adjustments, try a medium roast with chocolate or nut tasting notes rather than fruity ones.
Why does coffee taste bitter?
You may taste more bitterness and a drying sensation if you extract too much from the grounds. Very fine grounds, prolonged brewing or excessive stirring can contribute, but a bitter taste doesn't automatically mean you've over-extracted the coffee.
Roast level matters: darker roasting creates more roasted, smoky and bitter flavours while reducing much of the bright acidity you find in lighter roasts. You can't remove a strongly burnt roast flavour simply by shortening the brew time.
- Grind a little coarser if your coffee tastes harsh and your brew runs slowly.
- Shorten contact time if you've been leaving the grounds in contact with water for an extended period.
- Lower the water temperature slightly for a dark roast.
- Reduce vigorous stirring or repeated swirling if your brew leaves your mouth feeling dry.
- Try a lighter roast if you still taste excessive bitterness after trying several reasonable recipes.
Distinguish bitterness from strength before adjusting extraction. If the flavour is balanced but too intense, add a little hot water to the finished drink. You'll reduce its concentration, but you won't correct a burnt flavour or uneven extraction.
How to adjust your coffee brewing method
Change one variable and keep a short note of the coffee dose, water weight, grind setting and result. For filter coffee or a cafetière, roughly 60 g of coffee per litre of water gives you a useful starting point. You'll also find this brewing ratio in the Specialty Coffee Association's Golden Cup guidance. Adjust it to your taste rather than treating it as a fixed rule.
Filter coffee
If your pour-over tastes sour and drains very quickly, try a finer grind. If it tastes harsh and drains very slowly or stops draining, try a coarser grind or less stirring and swirling. Keep your pouring pattern consistent, since changing it can alter both contact time and how evenly water passes through the coffee.
Espresso
Keep the coffee dose fixed and weigh the espresso you produce. For sour espresso, try extracting a little more liquid to improve extraction; for harsh espresso, try extracting less. Adjust the grind separately if the flow is clearly too fast or too slow.
You can get a shot that tastes both sour and bitter when water passes through some parts of the coffee puck more readily than others. This is called channelling. Distribute the grounds evenly and tamp level before assuming you need a different temperature.
Cafetière
For sour cafetière coffee, try a finer grind or a longer steep. If it tastes bitter or feels gritty, stir less and decant after plunging rather than leaving your coffee sitting on the grounds. Don't force the plunger down, as you can disturb the sediment.
What else affects how your coffee tastes?
Your water's chemistry affects both extraction and how you perceive acidity. With high-alkalinity water, you may taste less acidity; with low-alkalinity water, you may find the same coffee much sharper. If recipe changes make little difference, compare your usual water with drinking water that has a different mineral composition. Don't assume a filter jug removes alkalinity.
With stale beans, you'll usually notice less sweetness and aroma, and you may taste woody or rancid flavours. Buy quantities you can use while they still taste fresh, store your beans in an airtight container and grind just before brewing. You may also find espresso less consistent with very recently roasted beans because they release substantial gas.
Clean away old coffee oils from baskets, portafilters, cafetière filters and reusable brewers. Rinse removable parts after use and follow the manufacturer's cleaning and descaling instructions. If your freshly brewed coffee still tastes bitter, smell the clean, empty brewer. If you notice a stale coffee smell, you probably still have residue to remove.
Sources
- Specialty Coffee Association (sca.coffee)